Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
standard by American Association of State and Highway Transportation Officials, 2010
Standard Practice for Grading or Verifying the Performance Grade of an Asphalt Binder
standard by American Association of State and Highway Transportation Officials, 2014
Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
standard by American Association of State and Highway Transportation Officials, 2010
Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) (ASTM Designation: C 109/C 109M-11b)
standard by American Association of State and Highway Transportation Officials, 2013
Standard Method of Test for Spot Test of Asphaltic Materials
standard by American Association of State and Highway Transportation Officials,
Standard Practice for Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders
standard by American Association of State and Highway Transportation Officials,
Policy on Land Use and Source Control Aspects of Traffic Noise Attenuation
standard by American Association of State and Highway Transportation Officials, 01/01/1980
Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
standard by American Association of State and Highway Transportation Officials, 08/01/2008
Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
standard by American Association of State and Highway Transportation Officials, 2002
Standard Method of Test for Progressing Auger Borings for Geotechnical Explorations
standard by American Association of State and Highway Transportation Officials, 2011
