Standard of Method of Test for Measure Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
standard by American Association of State and Highway Transportation Officials, 2017
Standard Practice for Quantifying Cracks in Asphalt Pavement Surfaces from Collected Pavement Images Utilizing Automated Methods
standard by American Association of State and Highway Transportation Officials, 2018
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
standard by American Association of State and Highway Transportation Officials,
Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
standard by American Association of State and Highway Transportation Officials, 2010
Standard Recommended Practice for Selection and Use of Emulsified Asphalts
standard by American Association of State and Highway Transportation Officials,
Standard Specification for Steel Sheet, Metallic-Coated and Polymer-Precoated, for Corrugated Steel Pipe (ASTM Designation: A 742/A 742M-03
standard by American Association of State and Highway Transportation Officials, 2005
Standard Method of Test for Tension Testing of Metallic Materials
standard by American Association of State and Highway Transportation Officials,
Standard Practice for Pipe Joint Selection for Highway Culvert and Storm Drains
standard by American Association of State and Highway Transportation Officials, 2017
Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA) (ASTM Designation: D 2172-05)
standard by American Association of State and Highway Transportation Officials, 2010
Standard Practice for Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems
standard by American Association of State and Highway Transportation Officials, 2014
