IEC 60068-2-69 Ed. 1.0 b:1995

Environmental testing – Part 2: Tests – Test Te: Solderability testing of electronic components for surface mount technology by the wetting balance method
standard by International Electrotechnical Commission, 12/08/1995

  • by admin
  • Comments Off on IEC 60068-2-69 Ed. 1.0 b:1995
  • IEC

IEC 60068-2-52 Ed. 3.0 b:2017

Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic (sodium chloride solution)
standard by International Electrotechnical Commission, 11/07/2017

  • by admin
  • Comments Off on IEC 60068-2-52 Ed. 3.0 b:2017
  • IEC

IEC 60169-24 Ed. 1.0 b:1991

Radio-frequency connectors – Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
standard by International Electrotechnical Commission, 11/15/1991

  • by admin
  • Comments Off on IEC 60169-24 Ed. 1.0 b:1991
  • IEC

IEC 60141-2 Ed. 1.0 b:1963

Tests on oil-filled and gas-pressure cables and their accessories – Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
standard by International Electrotechnical Commission, 01/01/1963

  • by admin
  • Comments Off on IEC 60141-2 Ed. 1.0 b:1963
  • IEC

IEC 60076-3 Ed. 2.0 b:2000

Power transformers – Part 3: Insulation levels, dielectric tests and external clearances in air
standard by International Electrotechnical Commission, 03/21/2000

  • by admin
  • Comments Off on IEC 60076-3 Ed. 2.0 b:2000
  • IEC

IEC 60027-4 Ed. 1.0 b:1985

Letter symbols to be used in electrical technology. Part 4: Symbols for quantities to be used for rotating electrical machines
standard by International Electrotechnical Commission, 09/30/1985

  • by admin
  • Comments Off on IEC 60027-4 Ed. 1.0 b:1985
  • IEC

IEC 60238 Ed. 9.0 b:2016

Edison screw lampholders
standard by International Electrotechnical Commission, 07/14/2016

  • by admin
  • Comments Off on IEC 60238 Ed. 9.0 b:2016
  • IEC

IEC 60072-2 Ed. 1.0 b:1990

Dimensions and output series for rotating electrical machines – Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
standard by International Electrotechnical Commission, 12/31/1990

  • by admin
  • Comments Off on IEC 60072-2 Ed. 1.0 b:1990
  • IEC

IEC 60068-2-78 Ed. 1.0 b:2001

Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state
standard by International Electrotechnical Commission, 08/20/2001

  • by admin
  • Comments Off on IEC 60068-2-78 Ed. 1.0 b:2001
  • IEC

IEC 62852 Ed. 1.1 b:2020

Connectors for DC-application in photovoltaic systems – Safety requirements and tests
standard by International Electrotechnical Commission, 03/25/2020

  • by admin
  • Comments Off on IEC 62852 Ed. 1.1 b:2020
  • IEC