IEC 60794-3-11 Ed. 2.0 b:2010

Optical fibre cables – Part 3-11: Outdoor cables – Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables
standard by International Electrotechnical Commission, 06/16/2010

IEC 61019-2 Ed. 2.0 b:2005

Surface acoustic wave (SAW) resonators – Part 2: Guide to the use
standard by International Electrotechnical Commission, 05/12/2005

IEC 61000-6-4 Ed. 2.0 b:2006

Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
standard by International Electrotechnical Commission, 07/10/2006

IEC 60839-10-1 Ed. 1.0 b:1995

Alarm systems – Part 10: Alarm systems for road vehicles – Section 1: Passenger cars
standard by International Electrotechnical Commission, 12/22/1995

IEC 61000-4-1 Ed. 2.0 b:2000

Electromagnetic compatibility (EMC) – Part 4-1: Testing and measurement techniques – Overview of IEC 61000-4 series
standard by International Electrotechnical Commission, 04/13/2000

IEC 61114-2 Ed. 1.0 b:1996

Methods of measurement on receiving antennas for satellite broadcast transmissions in the 11/12 GHz band – Part 2: Mechanical and environmental tests on individual and collective receiving antennas
standard by International Electrotechnical Commission, 02/14/1996

IEC 61083-2 Ed. 2.0 b:2013

Instruments and software used for measurement in high-voltage and high-current tests – Part 2: Requirements for software for tests with impulse voltages and currents
standard by International Electrotechnical Commission, 03/20/2013

IEC 60947-4-2 Ed. 3.0 b CORR1:2012

Corrigendum 1 – Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – AC semiconductor motor controllers and starters
Corrigenda by International Electrotechnical Commission, 07/25/2012

IEC 60811-603 Ed. 1.0 b:2012

Electric and optical fibre cables – Test methods for non-metallic materials – Part 603: Physical tests – Measurement of total acid number of filling compounds
standard by International Electrotechnical Commission, 03/13/2012

IEC 61076-4-108 Ed. 1.0 en:2002

Connectors for electronic equipment – Part 4-108: Printed board connectors with assessed quality – Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in
standard by International Electrotechnical Commission, 02/14/2002