SAE ARP 5718

Qualification Process for SAE AMS 1428 Type II,III and IV Fluids
standard by SAE International, 03/01/2008

SAE AMS5714E

Alloy Bars, Forgings, and Rings, Corrosion and Heat-Resistant 73Ni – 15.5Cr – 2.5Ti – 0.70Al – 7.0Fe Precipitation-Hardenable
standard by SAE International, 02/12/2018

SAE AMS5605G

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5Ni – 16Cr – 37Fe – 2.9Cb (Nb) – 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 ¿¿F (982 ¿¿C) Solution Heat Treated
standard by SAE International, 01/07/2019

SAE ARP5707

Pilot Training Recommendations for Unmanned Aircraft Systems (UAS) Civil Operations
standard by SAE International, 04/03/2016

SAE ARP5316C

Storage of Elastomeric Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
standard by SAE International, 12/06/2010

SAE ARP4285A

Aerospace – Evaluation of Particulate Contamination in Hydraulic Fluid – Membrane Procedure
standard by SAE International, 08/13/2018

SAE AMS7265C

Rings, Sealing, Ethylene Propylene (Epm) Rubber, Phosphate Ester Hydraulic Fluid Resistant, 75 85
standard by SAE International, 08/01/2001

SAE ARP552A

ACCESSORY ENVELOPE TYPE XVI FOR 11" NOMINAL DIAMETER GENERATORS AC OR DC 15 TO 60 KVA (TYPE I & II)
standard by SAE International, 07/15/1958

SAE AMS6352L

Steel Sheet, Strip, and Plate 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135)
standard by SAE International, 06/02/2018

SAE AMS5541H

Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 73Ni – 15.5Cr – 2.4Ti – 0.7Al – 7.0Fe Annealed
standard by SAE International, 01/07/2019