SAE ARP1947C

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Allow Castings, Determination and Acceptance of
standard by SAE International, 08/22/2018

SAE AMS5811C

Steel, Corrosion and Heat Resistant, Welding Wire 15Cr 30Ni 1.2Mo 2.2Ti 0.25Al 0.001B 0.30V (0.01-0.03C), Vacuum Induction Melted, Environmental Controlled Packaging ( Reaffirmed: Oct 2006 )
standard by SAE International, 11/01/2001

SAE AMS6523F

Steel, Sheet, Strip, and Plate 0.75Cr 9.0Ni 4.5Co 1.0Mo 0.09V (0.17 – 0.23C) Vacuum Consumable Electrode Melted, Annealed
standard by SAE International, 02/01/2007

SAE AMS5595G

Steel, Corrosion Resistant, Sheet, Strip, and Plate 9.0Mn – 20Cr – 6.5Ni – 0.28N Solution Heat Treated
standard by SAE International, 06/10/2014

SAE AMSI10

Insulating Compound, Electrical, Ceramic, Class L
standard by SAE International, 09/01/2000

SAE AMSDTL23053/5B

Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked
standard by SAE International, 12/06/2018

SAE AMS7459E

Bolts and Screws Steel, Low Alloy Heat Resistant 195,000 Psi Hardened & Tempered, Roll Threaded
standard by SAE International, 10/01/1993

SAE AMS5594A

Steel Plate, Corrosion and Moderate Heat Resistant 15.5cr 4.5ni 2.9mo 0.1n Equalized and Overtempered
standard by SAE International, 01/01/1981

SAE AMS6551

Steel Bars, Forgings and Tubing 1.75 Cr – 4.0 Ni – 0.5 Mo – (0.35–0.40 C) Premium Aircraft Quality Consumable Electrode Vacuum Remelted
standard by SAE International, 02/07/2013

SAE AMS6484D

Steel, Bars, Forgings, and Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340) Normalized and Tempered
standard by SAE International, 07/03/2012