SAE AMSDTL23053/5B

Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked
standard by SAE International, 12/06/2018

SAE AMS7459E

Bolts and Screws Steel, Low Alloy Heat Resistant 195,000 Psi Hardened & Tempered, Roll Threaded
standard by SAE International, 10/01/1993

SAE AMS5800F

Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 54Ni – 19Cr – 11Co – 10Mo – 3.2Ti – 1.5Al – 0.006B Vacuum Induction Melted
standard by SAE International, 02/09/2012

SAE AMS5541H

Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 73Ni – 15.5Cr – 2.4Ti – 0.7Al – 7.0Fe Annealed
standard by SAE International, 01/07/2019

SAE AMS6551

Steel Bars, Forgings and Tubing 1.75 Cr – 4.0 Ni – 0.5 Mo – (0.35–0.40 C) Premium Aircraft Quality Consumable Electrode Vacuum Remelted
standard by SAE International, 02/07/2013

SAE AMS6484D

Steel, Bars, Forgings, and Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340) Normalized and Tempered
standard by SAE International, 07/03/2012

SAE AMS5911B

Steel, Corrosion-Resistant, Sheet and Strip 19Cr – 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
standard by SAE International, 06/10/2014

SAE AMS5596L

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni – 19Cr – 3.0Mo – 5.1Cb (Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
standard by SAE International, 08/15/2016

SAE ARP 4244

Recommended Insertion Loss Test Methods for EMI Power Line Filters ( Reaffirmed: Aug 2004 )
standard by SAE International, 03/01/1998

SAE AMS5788F

Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co – 29Cr – 4.5W – 1.2C
standard by SAE International, 04/12/2012