SAE AMS7266B
Rings, Sealing, Fluorocarbon Rubber General Purpose, High Temperature, Fuel and Oil Resistant 65 – 75
standard by SAE International, 11/03/2017
- Comments Off on SAE AMS7266B
- SAE
Rings, Sealing, Fluorocarbon Rubber General Purpose, High Temperature, Fuel and Oil Resistant 65 – 75
standard by SAE International, 11/03/2017
Steel, Bars, 0.95Cr – 0.20Mo (0.28 to 0.33C) (SAE 4130), Normalized
standard by SAE International, 05/03/2004
Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 12.5Cr – 42.5Ni – 6.0Mo – 2.7Ti – 0.015B – 34Fe, Consumable Electrode Remelted or Vacuum Induction Melted, Solution, Stabilization, and Precipitation Heat Treated
standard by SAE International, 01/03/2008
Steel Tubing, Mechanical, 0.95Cr 0.20Mo (0.38-0.43C)
standard by SAE International, 05/01/1999
Alloy Bars and Forgings, Corrosion and Heat Resistant, 38fe 13.2cr 38ni 5.5mo 0.85cb 2.5ti 1.6al 0.009b, Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 07/01/1981
Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels
standard by SAE International, 10/10/2018
Beryllium Near-Net Preforms Standard Grade Hot Isostatic Pressed
standard by SAE International, 01/07/2015
Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf 1.0Ti ( Reaffirmed: Jun 2008 )
standard by SAE International, 10/01/2003
Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems
standard by SAE International, 06/07/2011
Steel, Bars and Forgings, Nitriding 1.6Cr – 0.35Mo – 1.1Al (0.38 – 0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength
standard by SAE International, 08/02/2018