SAE ARP4047A

Aircraft Deicing Vehicle, Self-Propelled, Small Capacity
standard by SAE International, 02/16/2004

SAE ARP1923B

Qualification and Certification of Etch Inspectors
standard by SAE International, 08/23/2018

SAE ARP1156

1992 Requisites for Design Specifications for Adsorptive Systems
standard by SAE International, 12/31/1969

SAE AMS6409D

Steel, Bars, Forgings, and Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340) Special Aircraft Quality Cleanliness Normalized and Tempered
standard by SAE International, 06/27/2012

SAE AMSQQA200/14A

Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded, 7178-T76 Improved Exfoliation Resistance
standard by SAE International, 09/28/2012

SAE AMS7811A

Molybdenum Alloy Sheet, Strip, and Plate 0.5ti Arc Cast, Stress Relieved
standard by SAE International, 10/01/1982

SAE AMS6907B

Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 2.0Sn – 4.0Zr – 6.0Mo Duplex Annealed
standard by SAE International, 12/04/2015

SAE AMS5886B

Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 50Ni 20Cr 20Co 5.8Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted 2100°F (1149°C) Solution Heat Treated
standard by SAE International, 10/03/2003

SAE AMSS6709A

Steel, Chrome-Molybdenum-Aluminum; Bars, Rods, Billets and Forging Stock (For Nitriding) (Aircraft Quality)
standard by SAE International, 09/04/2002

SAE AMS6322N

Steel Bars, Forgings, and Rings, 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740)
standard by SAE International, 11/23/2005