SAE AMS6472E
Steel, Bars and Forgings, Nitriding 1.6Cr – 0.35Mo – 1.1Al (0.38 – 0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength
standard by SAE International, 05/17/2010
- Comments Off on SAE AMS6472E
- SAE
Steel, Bars and Forgings, Nitriding 1.6Cr – 0.35Mo – 1.1Al (0.38 – 0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength
standard by SAE International, 05/17/2010
Steel Wire, Welding, Corrosion and Moderate Heat Resistant 15cr 7.1ni 2.4mo 1al
standard by SAE International, 04/24/2003
DRIVES – SQUARE FLANGE .600 PD SPLINE ACCESSORY (Stabilized: Feb 2013)
standard by SAE International, 02/05/2013
Ultrasonic Thickness Testing
standard by SAE International, 09/21/2018
Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
standard by SAE International, 07/22/2019
Columbium (Niobium) Sheet, Strip, Plate, and Foil
standard by SAE International, 12/18/2009
Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 72Ni – 3.0Mn – 20Cr – 2.5Cb(Nb)
standard by SAE International, 10/23/2009
Turbine Flowmeter Fuel Flow Calculations
standard by SAE International, 09/07/2015
Cargo Compartment Lighting for Transport Category Aircraft and Rotorcraft
standard by SAE International, 06/01/1992
Propeller Control Installation Clearance ( Reaffirmed: Feb 1984 Jul 1991 May 1995 Nov 2001 May 2006 )
standard by SAE International, 04/15/1950