SAE J2534-2/7_5_00
Pass-Thru Extended Feature – TP2.0
standard by SAE International, 01/17/2022
- Comments Off on SAE J2534-2/7_5_00
- SAE
SAE AS25064B
CONDUIT, FLEXIBLE, RADIO FREQUENCY SHIELDING (Stabilized: Jan 2022)
standard by SAE International, 01/12/2022
- Comments Off on SAE AS25064B
- SAE
SAE AMS2490
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process Thin Film
standard by SAE International, 02/16/2022
- Comments Off on SAE AMS2490
- SAE
SAE EPR2019007
Unsettled Issues in Determining Appropriate Modeling Fidelity for Automated Driving Systems Simulation
Report / Survey by SAE International, 12/06/2019
- Comments Off on SAE EPR2019007
- SAE
SAE AMS2436E
Coating, Aluminum Oxide Detonation Deposition
standard by SAE International, 02/23/2022
- Comments Off on SAE AMS2436E
- SAE
SAE J3005_202112
Permanently or Semi-Permanently Installed Diagnostic Communication Devices
standard by SAE International, 12/29/2021
- Comments Off on SAE J3005_202112
- SAE
SAE AMS4479A
Aluminum Alloy, Extruded Profiles (2824-T3511), 4.0Cu – 1.35Mg – 0.7Mn, Solution Heat Treated and Stress Relieved by Stretching
standard by SAE International, 03/29/2022
- Comments Off on SAE AMS4479A
- SAE
SAE EPR2020016
Unsettled Issues Regarding Policy Aspects of Automated Driving Systems
Report / Survey by SAE International, 08/31/2020
- Comments Off on SAE EPR2020016
- SAE
SAE J2892DA_202111
Graphics – Based Service Information
standard by SAE International, 11/23/2021
- Comments Off on SAE J2892DA_202111
- SAE
SAE AS9317E
SCREW, MACHINE – HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .2500-28 UNS-3A
standard by SAE International, 01/14/2022
- Comments Off on SAE AS9317E
- SAE
