STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, NYLON, ADJUSTABLE, WIRE SUPPORT, TYPE III, CLASS 1 (Stabilized: May 2017)
standard by SAE International, 05/12/2017
Bearing, Ball, Rod end, Double Row, Precision, Internal Thread, Self-Aligning, Airframe, Type IV, -65° to 300°F
standard by SAE International, 04/01/1998
MAXIMUM-ALLOWABLE-AIRSPEED INSTRUMENTS (TURBINE POWERED SUBSONIC AIRCRAFT)
standard by SAE International, 09/01/1996
Test Plan for The Digital Time Division Command/Response Multiplex Data Bus Couplers, Terminators, and Data Bus Cables (Stabilized: Aug 2017)
standard by SAE International, 08/10/2017
Bolt, Machine – Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .375-24 Unjf-3a
standard by SAE International, 07/01/1979
Boots, Heat-Shrinkable, Strain-Relief, Straight
standard by SAE International, 08/06/2008
Valve, Air, High Pressure Charging, 5000 psi
standard by SAE International, 02/21/2008
FITTING, UNION, BEAM SEAL
standard by SAE International, 04/29/2018
ASSEMBLY NUT, PLATE, REMOVABLE SELF-LOCKING NUT
standard by SAE International, 07/22/2016
PLUG, EXPANSION – CRES, 303, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S30300
standard by SAE International, 01/07/2014
