SAE AMS5766F

Alloy, Corrosion and Heat-Resistant, Bars and Forgings 21Cr – 32.5Ni – 0.38Ti – 0.38Al – 45Fe Solution Heat Treated
standard by SAE International, 07/23/2021

SAE AMS4205F

Aluminum Alloy, Plate 6.2Zn – 1.8Cu – 2.4Mg – 0.13Zr (7010-T7451) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 10/22/2021

SAE AMS4765G

Silver Alloy, Brazing Filler Metal 56Ag ¿¿¿ 42Cu ¿¿¿ 2.0Ni 1420 to 1640 ¿¿F (771 to 893 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021

SAE ARP6109A

Electronic Engine Control Hardware Change Management (Stabilized: Jun 2021)
standard by SAE International, 06/22/2021

SAE AMS3670/1C

Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material
standard by SAE International, 05/19/2021

SAE AMS3786

Elastomer: Nitrile Rubber (NBR) Synthetic Oil Resistant Sheets, 65 to 75 Type A Hardness for Products in Engine Oil Systems
standard by SAE International, 10/22/2021

SAE AIR6108

Engine Electronic Unit Fire and Overheat Design Guide
standard by SAE International, 06/10/2021

SAE ARP843B

Chip Detector, Electrical Connection, Remote Indicating (Stabilized: May 2021)
standard by SAE International, 05/28/2021

SAE AMS5561H

Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn – 20Cr – 6.5Ni – 0.28N High-Pressure Hydraulic
standard by SAE International, 10/12/2021

SAE AMS4364A

Aluminum Alloy, Plate, 7.9Zn – 1.8Cu – 2.0Mg – 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged
standard by SAE International, 09/15/2021