SAE AS6228
Safety Requirements for Procurement, Maintenance and Use of Hand-held Powered Tools
standard by SAE International, 09/12/2014
- Comments Off on SAE AS6228
- SAE
SAE AS4807D
FITTING ASSEMBLY, ELBOW, 90¿¿, BEAM SEAL, RETAINED NUT
standard by SAE International, 04/28/2018
- Comments Off on SAE AS4807D
- SAE
SAE AS9491A
BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
standard by SAE International, 11/01/2012
- Comments Off on SAE AS9491A
- SAE
SAE AS9456C
BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A (Stabilized: Oct 2015)
standard by SAE International, 10/30/2015
- Comments Off on SAE AS9456C
- SAE
SAE AS81914/3C
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, HELICAL FLUORINATED ETHYLENE PROPYLENE (FEP) STANDARD CONVOLUTION
standard by SAE International, 01/09/2017
- Comments Off on SAE AS81914/3C
- SAE
SAE AS7458A
Studs, Steel, Low Alloy, Heat Resistant, Normalized and Tempered, Roll Threaded, 135 000 psi Tensile Strength
standard by SAE International, 07/20/2009
- Comments Off on SAE AS7458A
- SAE
SAE AS520A
Drive Accessory 6.500 Pilot Diameter – QAD (Noncurrent: Oct 2001)
standard by SAE International, 10/01/2001
- Comments Off on SAE AS520A
- SAE
SAE AS4798C
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90¿¿ MALE
standard by SAE International, 11/08/2010
- Comments Off on SAE AS4798C
- SAE
SAE AS81659/37B
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (TRIPLE INSERT, TYPE II, CLASS 1, (-65 ¿¿C TO +125 ¿¿C), SERIES 2, SHELL DESIGNATOR A)
standard by SAE International, 06/06/2017
- Comments Off on SAE AS81659/37B
- SAE
SAE AS81582/7A
Connector, Adapter Assembly, Umbilical Cable to Stores Interface, Lanyard Release
standard by SAE International, 11/22/2011
- Comments Off on SAE AS81582/7A
- SAE
