SAE AS5173A

Fitting, Bushing, Port, Reducer
standard by SAE International, 01/01/2003

SAE AS9449B

Screw, Machine – Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi Min, .1380-40 UNJF-3A
standard by SAE International, 06/08/2009

SAE AS6116A

Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10340 kPa) Maximum, Specification for
standard by SAE International, 10/17/2016

SAE AS971B

DRIVE-ACCESSORY, (254) 10.000 BC ROUND, QAD, DESIGN STANDARD FOR
standard by SAE International, 03/01/2004

SAE AS85049/109D

CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 CRIMP, AS95234, AS81703 SERIES III, AND MIL-DTL-26482 SERIES II CONNECTORS)
standard by SAE International, 11/29/2016

SAE AS7431B

BRACKET, SUPPORT CLAMP (Stabilized: May 2019)
standard by SAE International, 05/03/2019

SAE J 1796

Spectral Transmission Test
standard by SAE International, 05/09/2005

SAE AS5259/7A

CRIMPING TOOL AND ACCESSORIES, DIES, WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS
standard by SAE International, 02/01/2017

SAE AS7240A

Washers, Spring Lock, Carbon Steel, Procurement Specification for (Stabilized: Feb 2015)
standard by SAE International, 02/24/2015

SAE J 1621

Engine Retarder Dynamometer Test and Capability Rating procedure
standard by SAE International, 12/01/2005