Bolt, Machine – Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
standard by SAE International, 03/15/2002
Education in Configuration and Data Management (Stabilized: Oct 2014)
standard by SAE International, 10/01/2014
WASHER, KEY – 180 DEG, LOCKING, CRES, UNS S32100
standard by SAE International, 08/15/2019
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90¿¿, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS)
standard by SAE International, 06/22/2016
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NON-ENVIRONMENTAL, THREADED ADAPTER, CATEGORY 7 (FOR MIL-DTL-26482 SERIES 1 JAM NUT RECEPTACLE CONNECTOR)
standard by SAE International, 05/11/2017
FITTING, CAP ASSEMBLY, BEAM SEAL, HYDRAULIC, 5000 PSI
standard by SAE International, 08/14/2018
CONNECTOR ACCESSORIES, ELECTRICAL, NONENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4A (FOR AS50151 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS)
standard by SAE International, 03/09/2011
PIN, STRAIGHT, HEADED, .311 DIAMETER, CRES, UNS S66286
standard by SAE International, 11/01/2012
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN, .3750-24 UNF-3A
standard by SAE International, 11/19/2012
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, AMS4967 (TI 6AL – 4V), .1900-32 UNJF-3A
standard by SAE International, 03/04/2019
