SAE AMS3793/7B

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/2 Inches (37.5 mm), 0.12 to 0.47 Ounces per Yard (3.7 to 14.6 g/m) (Stabilized: Sep 2013)
standard by SAE International, 09/11/2013

SAE AMS3270K

Chloroprene (CR) Rubber Sheet, Cotton Fabric Reinforced Weather Resistant (Stabilized: Aug 2011)
standard by SAE International, 08/25/2011

SAE AMS2759E

Heat Treatment of Steel Parts, General Requirements
standard by SAE International, 10/21/2008

SAE AMS3701

Epoxy Resin, Tetraglycidyl Methylenedianiline (Tgmda) 10,000 -14,000 Centipoise Viscosity (Cancelled: Oct 1995)
standard by SAE International, 10/01/1995

SAE AMS2759/2J

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher
standard by SAE International, 07/15/2019

SAE AIR6211

Ice Penetration Test Method for Runways and Taxiways Deicing/Anti-icing Chemicals
standard by SAE International, 04/19/2012

SAE AMS2478E

Anodic Treatment of Magnesium Alloys Acid Type, Full Coat
standard by SAE International, 08/23/2018

SAE AMS1536B

Cleaner for Aircraft Components Cold Tank Type, Solvent-Base
standard by SAE International, 01/25/2008

SAE AMS3634E

Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable (Stabilized: Jan 2012)
standard by SAE International, 01/16/2012

SAE AMS3415D

Flux, Aluminum Dip Brazing 1030 °F (554 °C) or Lower Liquidus
standard by SAE International, 04/19/2011