11/09/202017/08/2019

SAE AMS1535D

Cleaner, Transparent Plastic
standard by SAE International, 09/28/2018

• by admin
• Comments Off on SAE AMS1535D
• SAE

11/09/202017/08/2019

SAE AMS-DTL-23053/1

Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible
standard by SAE International, 07/01/1999

• by admin
• Comments Off on SAE AMS-DTL-23053/1
• SAE

11/09/202017/08/2019

SAE AMS3672C

Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural
standard by SAE International, 10/01/1995

• by admin
• Comments Off on SAE AMS3672C
• SAE

11/09/202017/08/2019

SAE AMS3306B

Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 – 65
standard by SAE International, 12/01/1998

• by admin
• Comments Off on SAE AMS3306B
• SAE

11/09/202017/08/2019

SAE AMS3279C

Sealing Compound, Sprayable, for Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350\mDF (177\mDC)
standard by SAE International, 03/01/2008

• by admin
• Comments Off on SAE AMS3279C
• SAE

11/09/202017/08/2019

SAE AIR6906

Impulse Towing Loads
standard by SAE International, 06/03/2018

• by admin
• Comments Off on SAE AIR6906
• SAE

11/09/202017/08/2019

SAE AMS3678/13

Type 13 10% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
standard by SAE International, 11/30/2010

• by admin
• Comments Off on SAE AMS3678/13
• SAE

11/09/202017/08/2019

SAE AMS3253A

Ethylene Propylene Rubber Phosphate Ester Resistant 65 – 75
standard by SAE International, 12/13/2010

• by admin
• Comments Off on SAE AMS3253A
• SAE

11/09/202017/08/2019

SAE AMS2431/3D

Peening Media (AWCR) Conditioned Carbon Steel Cut Wire Shot, Regular Hardness (45 to 52 HRC)
standard by SAE International, 05/15/2007

• by admin
• Comments Off on SAE AMS2431/3D
• SAE

11/09/202017/08/2019

SAE AMS1424P

Fluid, Aircraft Deicing/Anti-Icing, SAE Type I
standard by SAE International, 09/26/2018

• by admin
• Comments Off on SAE AMS1424P
• SAE