SAE AIR6517

Unmanned Systems (UxS) Control Segment (UCS) Architecture: Rhapsody Version of UCS ICD Model
standard by SAE International, 12/20/2016

SAE AMS3733C

Potting Compound, Epoxy Two Part, Highly Filled, Heat Cure, High Compressive Strength (Stabilized: May 2015)
standard by SAE International, 05/13/2015

SAE AMS3617D

Nylon Plastic Moldings and Extrusions
standard by SAE International, 04/01/1994

SAE AMS3571/6B

Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 95 Durometer "A" ( Reaffirmed: Apr 1995 Jan 2001 )
standard by SAE International, 04/01/1991

SAE AMS1527C

Cleaner for Aircraft Exterior Surfaces, Water-Miscible, Foam-On, Pressure-Spraying
standard by SAE International, 03/05/2008

SAE AMS3904/6B

Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier (1670 Dtex), 7.0% Finish (Stabilized: Aug 2016)
standard by SAE International, 08/01/2016

SAE AMS3607F

Plastic Sheet, Cotton Fabric Reinforced Phenol-Formaldehyde ( Reaffirmed: Jul 1998 )
standard by SAE International, 07/01/1993

SAE AMS3281F

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 ¿¿F (182 ¿¿C)
standard by SAE International, 03/08/2016

SAE AIR781

GUIDE FOR DETERMINING ENGINE STARTER DRIVE TORQUE REQUIREMENTS
standard by SAE International, 09/01/1994

SAE AMS4015M

Aluminum Alloy, Sheet and Plate 2.5Mg – 0.25Cr (5052-O) Annealed
standard by SAE International, 02/12/2018