SAE AMS2980A

Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 – Introduction
standard by SAE International, 01/26/2006

SAE AMS3798/5C

Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 3600 (16,014) Breaking Strength Herringbone Twill, Resin Treated (Stabilized: Apr 2015)
standard by SAE International, 04/14/2015

SAE AMS3678/6A

Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
standard by SAE International, 11/30/2010

SAE AMS2770A

Heat Treatment of Wrought Aluminum Alloy Parts
standard by SAE International, 06/15/1975

SAE AMS2375E

Control of Forgings Requiring First Article Approval
standard by SAE International, 07/10/2017

SAE AIR5378

Aircraft Tube Bending Methods, Techniques and Tooling
standard by SAE International, 01/02/2013

SAE AMS3856/3B

Cloth, Upholstery, Flame Resistant Nylon, Jacquard Weave (Stabilized: Jun 2016)
standard by SAE International, 06/24/2016

SAE AMS3384

Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 ¿¿F (-30 ¿¿C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems
standard by SAE International, 08/05/2013

SAE AMS3218C

Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95
standard by SAE International, 09/22/2005

SAE AMS4136A

Aluminum Alloy, Forgings, 4.3zn 3.3mg 0.6cu 0.2mn 0.2cr, Solution and Precipitation Heat Treated, Low Residual Stresses
standard by SAE International, 02/01/1996