SAE AMS2770

Heat Treatment of Wrought Aluminum Alloy Parts
standard by SAE International, 06/01/1974

SAE AMS2530

Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less, Impingement Applied
standard by SAE International, 01/05/2010

SAE AMS3894/4B

Graphite Fiber Tape and Sheet, Epoxy Resin Impregnated, G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 180 (82)
standard by SAE International, 12/01/1994

SAE AMS2243J

Tolerances Corrosion and Heat Resistant Steel Tubing
standard by SAE International, 11/30/2010

SAE AMS4157D

Aluminum Alloy Extrusions 7.7Zn – 2.4Mg – 1.6Cu – 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged
standard by SAE International, 11/14/2017

SAE AMS3894/3C

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150000 (1034) Tensile, 19000000 (131) Modulus, 80 (176) (Stabilized: Sep 2016)
standard by SAE International, 09/14/2016

SAE AMS3798/11B

Webbing, Low Modulus Aramid, 1-3/4 (44) Wide, 10,000 (44,582) Breaking Strength, Herringbone Twill
standard by SAE International, 07/01/1993

SAE AMS3251J

Synthetic Rubber and Cork Composition General Purpose Medium (Stabilized: May 2014)
standard by SAE International, 05/08/2014

SAE AMS2205

Tolerances, Aluminum Alloy and Magnesium Alloy Extrusions (Reaffirmed, 1991) (Cancelled: Aug 1996)
standard by SAE International, 08/01/1996

SAE AMS3598E

Plastic Sheet, Copper Faced, Glass Cloth Reinforced Polytetrafluoroethylene
standard by SAE International, 05/01/1995