SAE AMS4290L

Aluminum Alloy, Die Castings 9.5Si – 0.50Mg (360.0-F) As Cast
standard by SAE International, 10/28/2010

SAE AMS4124F

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
standard by SAE International, 02/06/2019

SAE AMS3904/1B

Yarn, Organic Fiber (Para-Aramid), Intermediate Modulus, 200 Denier (220 Dtex), 1.0% Finish
standard by SAE International, 03/01/1999

SAE AMS3894/3B

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus, 80 (176)
standard by SAE International, 06/01/2005

SAE AMS3718/2A

Webbing, Woven Nylon for Decelerators 1 (25) Wide, 4000 (17,800) Breaking Strength (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993

SAE AMS1531D

Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
standard by SAE International, 04/29/2020

SAE AMS4104

Aluminum Alloy, Sheet and Plate 4.5cu 1.5mg 0.60mn (2024-T36) Width Over 30 to 48 In., Incl.
standard by SAE International, 12/16/2002

SAE AMS3840E

Fabric, Asbestos Polytetrafluoroethylene Impregnated, Sintered
standard by SAE International, 09/01/1996

SAE AMS3811B

Rods, Aramid Fiber, Polyester Resin Coated, Pultrusion
standard by SAE International, 07/01/1993

SAE AMS3792/2A

Tape, Low Modulus Aramid, 2 (51), 1000 (4,448) Breaking Strength ( Reaffirmed: Apr 1994 )
standard by SAE International, 01/01/1989