SAE AMS2759/8A

Ion Nitriding
standard by SAE International, 06/27/2007

SAE AMS4330B

Aluminum Alloy, Plate (2297-T87) 2.8Cu – 1.5Li – 0.30Mn – 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged
standard by SAE International, 04/03/2012

SAE AMS3777/2B

Tape, Nylon, Nonmelting, Reinforcing 9/16 (14) Wide, 500 (2225 N) Breaking Strength
standard by SAE International, 10/01/1995

SAE AMS2417H

Plating, Zinc-Nickel Alloy
standard by SAE International, 10/18/2010

SAE AMS4149D

Aluminum Alloy, Die and Hand Forgings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7175-T74) Solution and Precipitation Heat Treated
standard by SAE International, 09/04/2002

SAE AMS2469H

Hard Anodic Coating on Aluminum and Aluminum Alloys
standard by SAE International, 07/15/2008

SAE AMS4329A

Aluminum Alloy, Plate (7085-T7651) 7.5Zn – 1.6Cu – 1.5Mg – 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
standard by SAE International, 11/03/2011

SAE AMS4066C

Aluminum Alloy, Drawn, Round Seamless Tubing 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti – (2219-T8511) Solution Heat Treated, Stress Relieved by Stretching and Precipitation Heat Treated
standard by SAE International, 12/05/2013

SAE AMS3867/5B

Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82) (Stabilized: Oct 2016)
standard by SAE International, 10/12/2016

SAE AMS3229J

Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 – 85
standard by SAE International, 03/21/2013