SAE AMS3727B

Resin, Epoxy, Matrix, Thermosetting, Moderate Temperature Resistant, Unfilled
standard by SAE International, 10/01/1995

SAE AMS3107/2A

Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 to +120 ¿¿C (-67 to +248 ¿¿F)
standard by SAE International, 08/15/2014

SAE AMS2355K

Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Rings
standard by SAE International, 03/28/2011

SAE AMS3793/9A

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 2.00 Inch (50 Mm), 0.12 to 1.10 Ounces Per Yard (3.7 to 34.1 Kg/M)
standard by SAE International, 03/01/1996

SAE AMS3025E

Polyalkylene Glycol Heat Treat Quenchant
standard by SAE International, 01/18/2018

SAE AMS4217J

Aluminum Alloy, Castings 7.0Si – 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
standard by SAE International, 03/04/2018

SAE AMS4006K

Aluminum Alloy, Sheet and Plate, 1.25Mn – 0.12Cu (3003-O), Annealed
standard by SAE International, 09/13/2007

SAE AMS3797/1C

Webbing, Nylon, Integral Locking Slots 5/8 (15.9) Wide, 1000 (4448) Breaking Strength (Stabilized: Apr 2015)
standard by SAE International, 04/14/2015

SAE AMS3373C

Compound, Silicone Rubber, Insulating and Sealing 35 to 55 (Stabilized: Jan 2012)
standard by SAE International, 01/17/2012

SAE AMS3898/6A

Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0035 inch (0.081 mm)
standard by SAE International, 08/18/2014