SAE AMS4202D

Aluminum Alloy Plate 5.7Zn – 2.2Mg – 1.6Cu – 0.22Cr (7475-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated
standard by SAE International, 03/29/2012

SAE AMS4201F

Aluminum Alloy Plate 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged
standard by SAE International, 07/22/2014

SAE AMS4117J

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings, 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr, (6061; -T6, -T651), Solution and Precipitation Heat Treated
standard by SAE International, 07/29/2009

SAE AMS3970A

Carbon Fiber Fabric Repair Prepreg, 120 ¿¿C (250 ¿¿F) Vacuum Curing Part 0 – Introduction
standard by SAE International, 12/06/2016

SAE AMS3167B

Solvents, Wipe for Cleaning Prior to Application of Primer and Top Coat Materials, or Sealing Compounds
standard by SAE International, 10/17/2005

SAE AMS4075

Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu – 1.5 Mg – 0.60 Mn – (Alclad 2024-T86) Width Over 60 In.
standard by SAE International, 07/01/1981

SAE AMS3867/4B

Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82) (Stabilized: Oct 2016)
standard by SAE International, 10/12/2016

SAE AMS3804D

Cloth, Airplane, Cotton, Mercerized, 65 Pounds (290 N) Breaking Strength (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993

SAE AMS4256C

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg – 0.35Si – 0.28Cu (No. 22 Brazing Sheet) As Fabricated
standard by SAE International, 03/23/2018

SAE AMS3323A

Sponge, Fluorosilicone (FVM) Rubber Closed Cell
standard by SAE International, 05/08/2014