SAE AMS4200C

Aluminum Alloy Plate 7.7Zn – 2.4Mg – 1.6Cu – 0.16Cr (7049-T7351) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated (Stabilized: Jun 2017)
standard by SAE International, 06/16/2017

SAE AMS4094D

Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 03/23/2018

SAE AMS4021G

Aluminum Alloy, Alclad Sheet and Plate, 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (Alclad 6061-0) Annealed
standard by SAE International, 03/29/2012

SAE AMS3756C

Moldings, Glass Fiber Filled Polytetrafluoroethylene (PTFE) 75% PTFE Resin, 25% Glass Fibers, As Sintered (Stabilized: Aug 2011)
standard by SAE International, 08/25/2011

SAE AMS3196G

Sponge, Silicone Rubber Closed Cell, Firm
standard by SAE International, 04/04/2017

SAE AMS4256B

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg – 0.35Si – 0.28Cu (No. 22 Brazing Sheet) As Fabricated
standard by SAE International, 04/02/2012

SAE AMS4220E

Aluminum Alloy, Castings, Sand, 4cu 2ni 1.5mg 0.2cr, Solution Treated and Overaged
standard by SAE International, 06/01/1969

SAE AMS4031H

Aluminum Alloy, Sheet and Plate 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti (2219-0) Annealed or when specified, “As Fabricated” (2219-F)
standard by SAE International, 05/23/2011

SAE AMS3793/3A

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/4 Inch (19 Mm), 0.11 to 0.60 Ounces Per Yard (3.4 to 18.6 G/M)
standard by SAE International, 03/01/1996

SAE AMS3284B

Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
standard by SAE International, 11/20/2012