SAE AMS4055D
Aluminum Alloy, Sheet, Clad Two Sides 0.6mg-0.35si-0.28cu (No. 22-O Brazing Sheet) Annealed
standard by SAE International, 01/01/1987
- Comments Off on SAE AMS4055D
- SAE
SAE AMS3797/11B
Webbing, Nylon, Integral Locking Slots, 1-1/8 (28) Wide, 11,000 (48,930) Breaking Strength
standard by SAE International, 03/01/1994
- Comments Off on SAE AMS3797/11B
- SAE
SAE AMS3657F
Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, As Sintered (Stabilized: Aug 2011)
standard by SAE International, 08/25/2011
- Comments Off on SAE AMS3657F
- SAE
SAE AMS3139A
Adhesive, Urethane Two-Part
standard by SAE International, 01/01/1990
- Comments Off on SAE AMS3139A
- SAE
SAE AMS2770C
Heat Treatment of Wrought Aluminum Alloy Parts
standard by SAE International, 04/15/1980
- Comments Off on SAE AMS2770C
- SAE
SAE AMS3844C
Cloth, Type "E" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated (Stabilized: Dec 2016)
standard by SAE International, 12/16/2016
- Comments Off on SAE AMS3844C
- SAE
SAE AMS2804D
Identification Castings
standard by SAE International, 10/12/2017
- Comments Off on SAE AMS2804D
- SAE
SAE AMS4344E
Aluminum Alloy, Extrusions 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
standard by SAE International, 03/04/2018
- Comments Off on SAE AMS4344E
- SAE
SAE AMS4159D
Aluminum Alloy, Extrusions 7.7Zn – 2.4Mg – 1.6Cu – 0.16Cr (7049-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged
standard by SAE International, 07/28/2003
- Comments Off on SAE AMS4159D
- SAE
SAE AMS4109A
Aluminum Alloy, Hand Forgings, 5.6zn 2.5mg 1.6cu 0.24cr
standard by SAE International, 01/01/1981
- Comments Off on SAE AMS4109A
- SAE
