SAE AMS3678/2B
Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions (Stabilized: Feb 2016)
standard by SAE International, 02/29/2016
- Comments Off on SAE AMS3678/2B
- SAE
SAE AMS3374/3A
Sealing Compound Two-Part, Condensation Cured (Type 3) Firewall Sealant
standard by SAE International, 02/18/2011
- Comments Off on SAE AMS3374/3A
- SAE
SAE AMS4008K
Aluminum Alloy, Sheet and Plate, 1.25Mn – 0.12Cu (3003-H14) Strain Hardened
standard by SAE International, 10/30/2006
- Comments Off on SAE AMS4008K
- SAE
SAE AMS3320J
Elastomer: Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 to 80 Type ¿¿¿A¿¿¿ Durometer Hardness
standard by SAE International, 05/10/2019
- Comments Off on SAE AMS3320J
- SAE
SAE AMS3684C
Resin, Polyimide, Sealing High-Temperature Resistant, 315 ¿¿C (600 ¿¿F) Unfilled (Stabilized: Oct 2016)
standard by SAE International, 10/13/2016
- Comments Off on SAE AMS3684C
- SAE
SAE AMS3366C
Silicone Rubber Compound Room Temperature Vulcanizing, 55,000 Centipoise Viscosity Durometer 55 – 70 (Stabilized: Jan 2012)
standard by SAE International, 01/17/2012
- Comments Off on SAE AMS3366C
- SAE
SAE AMS3817E
Nylon Braid, Flat Electrical Tying Resin Coated (Stabilized: Jun 2016)
standard by SAE International, 06/16/2016
- Comments Off on SAE AMS3817E
- SAE
SAE AMS4357
Aluminum Alloy, Die Forgings 3.5Cu ¿¿¿ 1.0Li – 0.04Mg ¿¿¿ 0.35Mn ¿¿¿ 0.45Ag ¿¿¿ 0.12Zr (2050-T852) Solution Heat Treated, Cold Worked and Artificially Aged
standard by SAE International, 06/06/2016
- Comments Off on SAE AMS4357
- SAE
SAE AMS3222H
Synthetic Rubber Hot Oil Resistant, High Swell 45 – 55
standard by SAE International, 06/04/2008
- Comments Off on SAE AMS3222H
- SAE
SAE AMS3052
Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened
standard by SAE International, 03/28/2013
- Comments Off on SAE AMS3052
- SAE
