SAE AMS4166F

Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T73) Solution Heat Treated and Overaged ( Reaffirmed: May 2008 )
standard by SAE International, 07/01/2003

SAE AMS3360

Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 200 – 600 Poise Viscosity
standard by SAE International, 07/01/1988

SAE AMS3272/3A

Cloth, Nylon, Polyurethane Coated, Plain Weave, 9.2 ounces/square yard (310 g/m\u2) ( Reaffirmed: Jul 1996 )
standard by SAE International, 07/01/1990

SAE AMS4173F

Aluminum Alloy, Extrusions 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T6511 or T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
standard by SAE International, 04/19/2013

SAE AMS3830A

Silica Cloth, "B" Stage Phenolic Resin Impregnated High Pressure Molding
standard by SAE International, 01/01/1990

SAE AMS4155B

Aluminum Alloy, Extrusions
standard by SAE International, 01/01/1966

SAE AMS4288

Aluminum Alloy Castings 7.0Si – 0.58Mg – 0.15Ti (E357.0-T6) Solution and Precipitation Heat Treated
standard by SAE International, 05/12/2016

SAE AMS4073

Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu – 1.5 Mg – 0.60 Mn – (Alclad 2024-T86) Width Over 30 to 48 In., Incl.
standard by SAE International, 07/01/1981

SAE AMS4040N

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu – 1.5Mg – 0.60Mn (2024-O with 1 ¿% Alclad); Annealed
standard by SAE International, 07/25/2012

SAE AMS4172F

Aluminum Alloy, Extrusions 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching
standard by SAE International, 04/19/2013