SAE AMS4215H

Aluminum Alloy, Castings 5.0Si – 1.2Cu – 0.50Mg (C355.0-T6) Solution and Precipitation Heat Treated
standard by SAE International, 05/24/2013

SAE AMS3023B

Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material
standard by SAE International, 03/31/2017

SAE AMS4015L

Aluminum Alloy, Sheet and Plate 2.5Mg – 0.25Cr (5052-0) Annealed
standard by SAE International, 11/14/2017

SAE AMS3667D

Polytetrafluoroethylene (PTFE) Sheet, Molded, General Purpose Grade, AS Sintered
standard by SAE International, 03/01/2008

SAE AMS3388D

Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Single Wire Braid Reinforced, Chloroprene Covered, Noncollapsing
standard by SAE International, 12/11/2012

SAE AMS3801/3C

Cloth, Parachute, Meta-Aramid, Low Modulus 12.0(407) Weight, Special Weave (Stabilized: Oct 2016)
standard by SAE International, 10/11/2016

SAE AMS3793/6A

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/4 Inch (31 Mm), 0.23 Ounces Per Yard (7.1 G/M)
standard by SAE International, 03/01/1996

SAE AMS4120R

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu – 1.5Mg – 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)
standard by SAE International, 05/19/2010

SAE AMS3777/3

Tape, Nylon, Nonmelting, Reinforcing 1 (25) Wide, 1000 (4450 N)Breaking Strength (Cancelled: Oct 1995)
standard by SAE International, 10/01/1995

SAE AMS3573B

Resin, Polyurethane (EU), Casting, Polyether-Type, Flexible, Solid, Low-Temperature Resistant 80 to 90 ( Reaffirmed: May 2003 )
standard by SAE International, 06/01/1994