SAE AMS4293

Aluminum Alloy Extrusions 7.9Zn – 1.6Cu – 2.2Mg – 0.16Cr (7249-T76511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
standard by SAE International, 12/04/2013

SAE AMS3681E

Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
standard by SAE International, 07/13/2017

SAE AMS3291

Felt, Kapok
standard by SAE International, 12/16/2002

SAE AMS3832D

Roving, Type "S-2" Glass Epoxy Resin Impregnated (Stabilized: Dec 2016)
standard by SAE International, 12/16/2016

SAE AMS3218D

Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95
standard by SAE International, 10/23/2017

SAE AMS4270B

Aluminum Alloy, Alclad Flat Sheet 4.1Cu – 1.4Mg – 0.45Mn (Alclad 2424-T3) Solution Heat Treated and Cold Worked
standard by SAE International, 02/15/2012

SAE AMS3731/10C

POTTING COMPOUND, EPOXY Bisphenol A-Type Unfilled, Room Temperature Cure, Semiflexible (Stabilized: Nov 2017)
standard by SAE International, 11/29/2017

SAE AMS4134G

Aluminum Alloy, Die Forgings 4.4Cu – 0.85Si – 0.80Mn – 0.50Mg (2014-T4) Solution Heat and Naturally Aged
standard by SAE International, 08/08/2018

SAE AMS4277A

Aluminum Alloy, Sheet 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-0) Annealed, Fine Grained
standard by SAE International, 11/14/2017

SAE AMS2980/3A

Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification – Fabric
standard by SAE International, 01/26/2006