SAE AMS4236D

Aluminum Alloy Castings 4.6Cu – 0.35Mn – 0.25Mg – 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged
standard by SAE International, 06/02/2015

SAE AMS4170

Aluminum Alloy, Impact Extrusions 5.6zn 2.5mg 1.6cu 0.25cr (75s-T6)
standard by SAE International, 01/01/1987

SAE AMS4080N

Aluminum Alloy, Drawn Seamless Tubing, 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-0), Annealed
standard by SAE International, 12/17/2009

SAE AMS3903A

Cloth, Organic Fiber (Para-Aramid), High Modulus Epoxy Resin Impregnated
standard by SAE International, 07/16/2013

SAE AMS3301H

Silicone, Rubber General Purpose 40 Durometer
standard by SAE International, 06/23/2011

SAE AMS3901/12C

Yarn, Organic Fiber (Para-Aramid), High Modulus 2160 (2400 d tex) Denier, 1.2% Finish
standard by SAE International, 07/31/2014

SAE AMS3870D

Ceramic Moldings and Extrusions, Dense Ultra-High Alumina (99% Al203) (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993

SAE AMS3568/3A

Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing, 20 lb/cu ft (320 kg/m\u3) Density ( Reaffirmed: Aug 1998 Jan 2006 )
standard by SAE International, 07/01/1993

SAE AMS3296B

Diglycidyl Ester Resin
standard by SAE International, 07/01/1993

SAE AMS4282E

Aluminum Alloy Castings (Permanent Mold) 4 Copper – 2 Silicon (Solution Precipitation)
standard by SAE International, 10/01/1981