SAE AMS3839E
Fabric-Wire Reinforced Asbestos, Polytetrafluoroethylene Impregnated, Sintered
standard by SAE International, 07/01/1992
- Comments Off on SAE AMS3839E
- SAE
SAE AMS3397
Ignition-Cable, High Tension Copper Conductor, Low Capacitance
standard by SAE International, 12/16/2002
- Comments Off on SAE AMS3397
- SAE
SAE AMS4218J
Aluminum Alloy Castings 7.0Si – 0.35Mg (A356.0-T6) (Formerly T6P Temper) Solution and Precipitation Heat Treated
standard by SAE International, 10/29/2015
- Comments Off on SAE AMS4218J
- SAE
SAE AMS3145C
Paint, Marking Epoxy ( Reaffirmed: Apr 1994 )
standard by SAE International, 10/01/1985
- Comments Off on SAE AMS3145C
- SAE
SAE AMS4324
Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511), 8.0Zn – 2.3Cu – 2.0Mg – 0.16Zr, Solution Heat Treated, Stress-Relieved, and Overaged
standard by SAE International, 08/21/2002
- Comments Off on SAE AMS4324
- SAE
SAE AMS3695
Adhesive Film, Epoxy-Base For High Durability Structural Adhesive Bonding
standard by SAE International, 08/14/2014
- Comments Off on SAE AMS3695
- SAE
SAE AMS3380D
Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced
standard by SAE International, 12/11/2012
- Comments Off on SAE AMS3380D
- SAE
SAE AMS3249C
Ethylene Propylene (EPDM) Rubber, Hydrazine-Base-Fluid Resistant, 75-85 ( Reaffirmed: Aug 1998 )
standard by SAE International, 10/01/1993
- Comments Off on SAE AMS3249C
- SAE
SAE AMS3217/4C
Test Slabs, Fluoroelastomer (FKM) 65 – 75
standard by SAE International, 02/23/2017
- Comments Off on SAE AMS3217/4C
- SAE
SAE AMS3353
Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40¿¿F (-40¿¿C) For Elastomeric Parts in Aircraft Engine Oil, Fuel and Hydraulics Systems
standard by SAE International, 04/14/2009
- Comments Off on SAE AMS3353
- SAE
