SAE AMS3570F
Foam, Flexible Polyurethane Open Cell, Medium Flexibility (Stabilized: Nov 2011)
standard by SAE International, 11/07/2011
- Comments Off on SAE AMS3570F
- SAE
SAE AMS3368B
Silicone Resin, Elastomeric, Transparent Elevated Temperature Cure (Stabilized: Jan 2012)
standard by SAE International, 01/17/2012
- Comments Off on SAE AMS3368B
- SAE
SAE AMS3397
Ignition-Cable, High Tension Copper Conductor, Low Capacitance
standard by SAE International, 12/16/2002
- Comments Off on SAE AMS3397
- SAE
SAE AMS3839E
Fabric-Wire Reinforced Asbestos, Polytetrafluoroethylene Impregnated, Sintered
standard by SAE International, 07/01/1992
- Comments Off on SAE AMS3839E
- SAE
SAE AMS3145C
Paint, Marking Epoxy ( Reaffirmed: Apr 1994 )
standard by SAE International, 10/01/1985
- Comments Off on SAE AMS3145C
- SAE
SAE AMS4218J
Aluminum Alloy Castings 7.0Si – 0.35Mg (A356.0-T6) (Formerly T6P Temper) Solution and Precipitation Heat Treated
standard by SAE International, 10/29/2015
- Comments Off on SAE AMS4218J
- SAE
SAE AMS3731/5B
POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Room Temperature Cure, Low Exotherm (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993
- Comments Off on SAE AMS3731/5B
- SAE
SAE AMS3271B
Cloth, Knitted Nylon Stretch Polychloroprene Coated (Stabilized: Aug 2011)
standard by SAE International, 08/25/2011
- Comments Off on SAE AMS3271B
- SAE
SAE AMS3702B
Epoxy Resin, Tetraglycidyl Methylenedianiline, 14,000 to 18,000 Centipoise Viscosity
standard by SAE International, 07/01/1984
- Comments Off on SAE AMS3702B
- SAE
SAE AMS4323C
Aluminum Alloy, Hand Forgings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 02/27/2015
- Comments Off on SAE AMS4323C
- SAE
