SAE AMS3702B

Epoxy Resin, Tetraglycidyl Methylenedianiline, 14,000 to 18,000 Centipoise Viscosity
standard by SAE International, 07/01/1984

SAE AMS4323C

Aluminum Alloy, Hand Forgings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 02/27/2015

SAE AMS3755/1B

Powder, Fumed Silicon Dioxide Thickening Efficiency 120 (Stabilized: Nov 2016)
standard by SAE International, 11/18/2016

SAE AMS3378B

Sealant, Silicone, Two-Part, General Purpose Room Temperature Vulcanizing Non-Fuel Resistant (Stabilized: Jan 2012)
standard by SAE International, 01/17/2012

SAE AMS4304B

Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated
standard by SAE International, 03/26/2015

SAE AMS3901/13B

Yarn, Organic Fiber (Para-Aramid), High Modulus 2450 (2720 d tex) Denier, 0.6% Finish
standard by SAE International, 07/31/2014

SAE AMS3315F

Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced ( Reaffirmed: Apr 1995 May 2005 )
standard by SAE International, 10/01/1991

SAE AMS3329B

Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45 – 55
standard by SAE International, 05/17/2010

SAE AMS3084C

Lubricant, Solid Film Minimal Outgassing (Stabilized: Sep 2016)
standard by SAE International, 09/12/2016

SAE AMS4150L

Aluminum Alloy, Extrusions and Rings 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated ( Reaffirmed: May 2008 )
standard by SAE International, 08/01/2003