SAE AMS3135G

Coating Material, Silicone Resin 400 ¿¿F (205 ¿¿C) (Stabilized: Jul 2013)
standard by SAE International, 07/22/2013

SAE AMS4090F

Aluminum Alloy, Plate 5.7Zn – 2.2Mg – 1.6Cu – 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 01/15/2015

SAE AMS4081J

Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
standard by SAE International, 04/03/2014

SAE AMS3836

FABRIC, GLASS (182) (DECORATIVE GRADE)
standard by SAE International, 12/31/2012

SAE AMS3793/8A

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-3/4 Inch (44 Mm), 0.17 to 2.50 Ounces Per Yard (5.3 to 77.5 G/M)
standard by SAE International, 03/01/1996

SAE AMS3338F

Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 75 – 85
standard by SAE International, 04/01/1991

SAE AMS4169L

Aluminum Alloy, Extrusions 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
standard by SAE International, 01/09/2012

SAE AMS4046F

Aluminum Alloy Sheet and Plate, Alclad One Side 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (Alclad One Side 7075; -T6 Sheet -T651 Plate) Solution and Precipitation Heat Treated
standard by SAE International, 03/29/2012

SAE AMS3731/4B

POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993

SAE AMS4112D

Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished
standard by SAE International, 01/01/1996