SAE AMS4243B

Aluminum Alloy, Alclad Sheet 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
standard by SAE International, 04/03/2014

SAE AMS3372A

Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure ( Reaffirmed: Apr 1994 Apr 2001 )
standard by SAE International, 07/01/1988

SAE AMS3529B

Plastic Sheet and Film, Vinyl Copolymers Unplasticized (Stabilized: May 2015)
standard by SAE International, 05/13/2015

SAE AMS3375B

Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
standard by SAE International, 04/01/2001

SAE AMS3334F

Silicone Rubber Extreme Low-Temperature Resistant 35 – 45
standard by SAE International, 03/23/2018

SAE AMS4277B

Aluminum Alloy, Sheet 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-O) Annealed, Fine Grained
standard by SAE International, 02/06/2018

SAE AMS4269

Aluminum Alloy, Sheet and Plate 4.4Cu – 1.5Mg – 0.60Mn; (2024-T361), Solution Heat Treated and Cold Worked
standard by SAE International, 12/20/2011

SAE AMS4156K

Aluminum Alloy, Extrusions 0.68Mg – 0.40Si (6063-T6) Solution and Precipitation Heat Treated
standard by SAE International, 05/08/2015

SAE AMS3892/6B

Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus (Stabilized: Dec 2016)
standard by SAE International, 12/16/2016

SAE AMS3382D

Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness
standard by SAE International, 11/20/2017