SAE AMS4156K
Aluminum Alloy, Extrusions 0.68Mg – 0.40Si (6063-T6) Solution and Precipitation Heat Treated
standard by SAE International, 05/08/2015
- Comments Off on SAE AMS4156K
- SAE
SAE AMS3892/6B
Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus (Stabilized: Dec 2016)
standard by SAE International, 12/16/2016
- Comments Off on SAE AMS3892/6B
- SAE
SAE AMS3382D
Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness
standard by SAE International, 11/20/2017
- Comments Off on SAE AMS3382D
- SAE
SAE AMS3150C
Fluid, Hydraulic Fire Resistant
standard by SAE International, 07/01/1986
- Comments Off on SAE AMS3150C
- SAE
SAE AMS3855A
Flame Resistance Treatment of Interior Fabrics
standard by SAE International, 01/01/1987
- Comments Off on SAE AMS3855A
- SAE
SAE AMS3796/2A
Webbing, Nylon, Aircraft Arresting, 130,000 Pounds (578 Kn) (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993
- Comments Off on SAE AMS3796/2A
- SAE
SAE AMS3718/1B
Webbing, Woven Nylon For Decelerators 3/4 (19) Wide, 3000 (13,350) Breaking Strength (Stabilized: Jun 2016)
standard by SAE International, 06/14/2016
- Comments Off on SAE AMS3718/1B
- SAE
SAE AMS3630F
Plastic Extrusions, Flexible, Polyvinyl Chloride
standard by SAE International, 10/01/1996
- Comments Off on SAE AMS3630F
- SAE
SAE AMS4325
Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn – 2.4Mg – 2.2Cu – 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged
standard by SAE International, 05/24/2013
- Comments Off on SAE AMS4325
- SAE
SAE AMS4048P
Aluminum Alloy Sheet and Plate, Alclad 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (Alclad 7075-O) Annealed or when specified, ¿¿¿As Fabricated¿¿¿ (Alclad 7075-F)
standard by SAE International, 06/16/2016
- Comments Off on SAE AMS4048P
- SAE
