SAE AMS3372A

Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure ( Reaffirmed: Apr 1994 Apr 2001 )
standard by SAE International, 07/01/1988

SAE AMS3529B

Plastic Sheet and Film, Vinyl Copolymers Unplasticized (Stabilized: May 2015)
standard by SAE International, 05/13/2015

SAE AMS3375B

Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
standard by SAE International, 04/01/2001

SAE AMS3334F

Silicone Rubber Extreme Low-Temperature Resistant 35 – 45
standard by SAE International, 03/23/2018

SAE AMS4174D

Aluminum Alloy, Flash Welded Rings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
standard by SAE International, 10/18/2010

SAE AMS3894/4A

Graphite Fiber Tape and Sheet, Epoxy Resin Impregnated, G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 180 (82) (Cancelled: Jan 1983)
standard by SAE International, 01/01/1983

SAE AMS3215M

Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 – 75
standard by SAE International, 11/29/2012

SAE AMS4221D

Aluminum Alloy, Plate 4.4Cu – 1.5Mg – 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 04/06/2011

SAE AMS4031J

Aluminum Alloy, Sheet and Plate 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti (2219-O) Annealed or when specified, ¿¿¿As Fabricated¿¿¿ (2219-F)
standard by SAE International, 07/07/2017

SAE AMS3662C

Polytetrafluoroethylene Film, General Purpose Grade
standard by SAE International, 07/01/1991