SAE AMS4174D

Aluminum Alloy, Flash Welded Rings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
standard by SAE International, 10/18/2010

SAE AMS3894/4A

Graphite Fiber Tape and Sheet, Epoxy Resin Impregnated, G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 180 (82) (Cancelled: Jan 1983)
standard by SAE International, 01/01/1983

SAE AMS3215M

Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 – 75
standard by SAE International, 11/29/2012

SAE AMS4221D

Aluminum Alloy, Plate 4.4Cu – 1.5Mg – 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 04/06/2011

SAE AMS4031J

Aluminum Alloy, Sheet and Plate 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti (2219-O) Annealed or when specified, ¿¿¿As Fabricated¿¿¿ (2219-F)
standard by SAE International, 07/07/2017

SAE AMS3662C

Polytetrafluoroethylene Film, General Purpose Grade
standard by SAE International, 07/01/1991

SAE AMS3359C

Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa¿¿s) Viscosity (Stabilized: Oct 2016)
standard by SAE International, 10/10/2016

SAE AMS3906/7C

Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-33 – 95 (203) (Stabilized: Oct 2016)
standard by SAE International, 10/13/2016

SAE AMS3904/12B

Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 4500 Denier (5000 Dtex), 0.9% Finish (Stabilized: Aug 2016)
standard by SAE International, 08/01/2016

SAE AMS3358C

Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa¿¿s) Viscosity (Stabilized: Jan 2012)
standard by SAE International, 01/17/2012