SAE - Page 735 of 2482 - Standard Share Best

11/09/202017/08/2019

SAE AMS3710C

Sandwich Structures, Glass Fabric-Resing Low Pressure Molded, Heat Resistant
standard by SAE International, 08/19/2014

by admin
Comments Off on SAE AMS3710C
SAE

11/09/202017/08/2019

SAE AMS3588D

Plastic Tubing, Electrical Insulation, Irradiated Polyolefin, Clear, Very Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
standard by SAE International, 01/01/1993

by admin
Comments Off on SAE AMS3588D
SAE

11/09/202017/08/2019

SAE AMS4260G

Aluminum Alloy, Investment Castings 7.0Si – 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
standard by SAE International, 10/01/2014

by admin
Comments Off on SAE AMS4260G
SAE

11/09/202017/08/2019

SAE AMS4110D

Aluminum Alloy, Bars and Rods, Rolled Or Cold Finished 4.0cu 0.70mn 0.50mg Stress Relief Stretched
standard by SAE International, 01/01/1983

by admin
Comments Off on SAE AMS4110D
SAE

11/09/202017/08/2019

SAE AMS4025L

Aluminum Alloy, Sheet and Plate, 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-0) Annealed
standard by SAE International, 07/15/2008

by admin
Comments Off on SAE AMS4025L
SAE

11/09/202017/08/2019

SAE AMS3349D

Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 – 75 (Stabilized: May 2014)
standard by SAE International, 05/27/2014

by admin
Comments Off on SAE AMS3349D
SAE

11/09/202017/08/2019

SAE AMS3894/5C

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110000 (758) Tensile, 27000000 (186) Modulus, 80 (176) (Stabilized: Sep 2016)
standard by SAE International, 09/14/2016