SAE AMS4022F

Aluminum Alloy Sheet and Plate, Alclad, 1.0mg 0.60si 0.28cu 0.20cr
standard by SAE International, 09/01/1996

SAE AMS3894/14A

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 175 (347)
standard by SAE International, 06/01/2005

SAE AMS3800B

Cloth, Knitted, Polyamide, High Temperature Resistant Reverse Jersey (Stabilized: Jun 2016)
standard by SAE International, 06/20/2016

SAE AMS3266A

Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive
standard by SAE International, 02/23/2017

SAE AMS4335A

Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness (Stabilized: Jan 2017)
standard by SAE International, 01/03/2017

SAE AMS3901/2D

Yarn, Organic Fiber (Para-Aramid), High Modulus 380 Denier, (420 d tex), 0.6% Finish
standard by SAE International, 07/30/2014

SAE AMS3894/12B

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200000 (1379) Tensile, 18000000 (124) Modulus, 120 (248) (Stabilized: Sep 2016)
standard by SAE International, 09/13/2016

SAE AMS3802E

Cloth, Airplane, Cotton, Mercerized, 50 Pounds (220 N) Breaking Strength (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993

SAE AMS3718/1A

Webbing, Woven Nylon for Decelerators 3/4 (19) Wide, 3000 (13,350) Breaking Strength (Noncurrent: Jan 1993)
standard by SAE International, 01/01/1993

SAE AMS4255C

Aluminum Alloy, Clad One Side Sheet 0.6Mg – 0.35Si – 0.28Cu (No. 21 Brazing Sheet) As Fabricated
standard by SAE International, 03/04/2018