SAE AMS3909/3A

Cloth, Aramid 2.0 Ounces per Square Yard (68 g/m2), 230 Pounds Force per Inch (40 279 N/m) (Warp) and 220 Pounds Force per Inch (38 528 N/m) (Filling)
standard by SAE International, 08/19/2014

SAE AMS3906/4B

Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-26 – 150 (302)
standard by SAE International, 10/01/1997

SAE AMS3845/1B

Cloth, Type "E" Glass, "B" Stage Polyimide-Resin-Impregnated 181 Style Fabric, Low-Flow Addition-Cure Resin for Press Cure At 40 – 100 Psi (275 – 690 Kpa) Or Vacuum/Autoclave Processing
standard by SAE International, 01/01/1992

SAE AMS3798/6B

Webbing, Low Modulus Aramid, 3-1/32 (77) Wide, 9,000 (40,034) Breaking Strength, Double Plain Weave With Binder
standard by SAE International, 07/01/1993

SAE AMS3415E

Flux, Aluminum Dip Brazing 1030 ¿¿F (554 ¿¿C) or Lower Liquidus
standard by SAE International, 01/12/2017

SAE AMS4245E

Aluminum Alloy, Welding Wire 5.0Si – 1.2Cu – 0.50Mg (C355.0)
standard by SAE International, 04/19/2010

SAE AMS3642E

Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant (Stabilized: Jan 2012)
standard by SAE International, 01/16/2012

SAE AMS3697C

Aerodynamic Fairing Compound ¿¿¿55¿¿ to +150¿¿C (¿¿¿65¿¿ to +300¿¿F) (Stabilized: Jan 2012)
standard by SAE International, 01/17/2012

SAE AMS3894/14B

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621) Tensile, 40000000 (276) Modulus, 175 (347) (Stabilized: Sep 2016)
standard by SAE International, 09/13/2016

SAE AMS3670B

Polyamide-Imide Bar, Rod, and Shapes Molded or Extruded
standard by SAE International, 03/04/2003