SAE AMS4052A

Aluminum Alloy Sheet and Plate, Aluminum Alloy Clad 6.8zn – 2.75 Mg – 2 Cu – 0.3 Cr (Alc. 7178-T6)
standard by SAE International, 01/01/1981

SAE AMS3892/7A

Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
standard by SAE International, 05/31/2005

SAE AMS3792/3B

Tape, Low Modulus Aramid 2 (51), 3000 (13,345) Breaking Strength (Stabilized: Feb 2012)
standard by SAE International, 02/09/2012

SAE AMS4343D

Aluminum Alloy, Extrusions 7.7Zn – 2.4Mg – 1.6Cu – 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
standard by SAE International, 02/15/2012

SAE AMS4105

Aluminum Alloy, Sheet and Plate 4.5cu 1.5mg 0.60mn (2024-T86) Width Over 48 to 60 In., Incl.
standard by SAE International, 12/16/2002

SAE AMS3894/2B

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus, 175 (347)
standard by SAE International, 05/31/2005

SAE AMS4061

Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu – 1.5 Mg – 0.60 Mn – (Alclad 2024-T36) Width Over 60 Inches
standard by SAE International, 07/01/1981

SAE AMS4205D

Aluminum Alloy, Plate 6.2Zn – 1.8Cu – 2.4Mg – 0.13Zr (7010-T7451) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
standard by SAE International, 02/05/2015

SAE AMS4045K

Aluminum Alloy Sheet and Plate 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
standard by SAE International, 12/02/2010

SAE AMS3798/5B

Webbing, Low Modulus Aramid, 1-23/32 (44) Wide, 3,600 (16,014) Breaking Strength, Herringbone Twill, Resin Treated
standard by SAE International, 07/01/1993