SAE AMS3798/5B

Webbing, Low Modulus Aramid, 1-23/32 (44) Wide, 3,600 (16,014) Breaking Strength, Herringbone Twill, Resin Treated
standard by SAE International, 07/01/1993

SAE AMS4042F

Aluminum Alloy, Sheet and Plate, Alclad 4.5cu 1.5mg 0.60mn Width 48 In. and Under
standard by SAE International, 01/01/1981

SAE AMS4148E

Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated
standard by SAE International, 11/07/2011

SAE AMS4278B

Aluminum Alloy, Alclad Sheet 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (Alclad 7075-0) Annealed, Fine Grained
standard by SAE International, 12/04/2013

SAE AMS4124E

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
standard by SAE International, 09/28/2012

SAE AMS4131D

Aluminum Alloy, Die and Hand Forgings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T74) Solution Heat Treated and Aged
standard by SAE International, 11/03/2011

SAE AMS3799/2B

Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10,231 N) Breaking Strength ( Reaffirmed: Aug 1998 Jan 2006 )
standard by SAE International, 07/01/1993

SAE AMS4010C

Aluminum Alloy Foil, 1.25Mn – 0.12Cu (3003-H18)
standard by SAE International, 04/01/1992

SAE AMS3892/10B

Tow, Carbon Fiber For Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus (Stabilized: Dec 2016)
standard by SAE International, 12/27/2016

SAE AMS4289

Aluminum Alloy Castings 7.0Si – 0.55Mg – 0.12Ti (F357.0-T6) Solution and Precipitation Heat Treated
standard by SAE International, 04/19/2013