SAE AMS4232C

Aluminum Alloy Extrusions 2.7Cu – 2.2Li – 0.12Zr (2090-T86) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
standard by SAE International, 10/25/2012

SAE AMS4343F

Aluminum Alloy, Extrusions 7.7Zn – 2.4Mg – 1.6Cu – 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
standard by SAE International, 04/10/2018

SAE AMS4210L

Aluminum Alloy, Castings 5.0Si – 1.2Cu – 0.50Mg (355.0-T51) Precipitation Heat Treated
standard by SAE International, 11/02/2018

SAE AMS4106

Aluminum Alloy, Sheet and Plate 4.5cu 1.5mg 0.60mn (2024-T86) Width Over 60 Inches
standard by SAE International, 12/16/2002

SAE AMS4145F

Alumunim Alloy, Forgings, 12.2si 1.1mg 0.9cu 0.9ni
standard by SAE International, 09/01/1996

SAE AMS4199A

Aluminum Alloy, Sheet and Plate, Alclad 4.3zn 3.3mg 0.6cu 0.20mn 0.17cr
standard by SAE International, 01/01/1970

SAE AMS4115H

Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings, Annealed, 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-0)
standard by SAE International, 07/10/2009

SAE AMS4237B

Aluminum Alloy, Castings, Sand, 4.6Cu – 0.35Mn – 0.25Mg – 0.22Ti (206.0-T71), Solution Heat Treated and Naturally Aged
standard by SAE International, 04/13/2007

SAE AMS4333C

Aluminum Alloy, Die Forgings, 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T7452), Solution Heat Treated, Compression Stress-Relieved, and Overaged
standard by SAE International, 09/02/2009

SAE AMS4302B

Aluminum Alloy, Laminated Sheet, Aramid Fiber Reinforced 5.7Zn – 2.2Mg – 1.6Cu – 0.22Cr (7475-T761) 3, 5, 7, or 9 Ply
standard by SAE International, 11/07/2011