SAE AMS4967K

Titanium Alloy, Bars, Wire, Forgings, and Rings, 6.0Al – 4.0V, Annealed, Heat Treatable
standard by SAE International, 06/23/2011

SAE AMS4966R

Titanium Alloy, Forgings 5Al – 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
standard by SAE International, 06/05/2017

SAE AMS4420P

Magnesium Alloy Castings, Sand 6Al – 3Zn (AZ63A-F) As Cast (Stabilized: May 2017)
standard by SAE International, 05/25/2017

SAE AMS4779H

Nickel Alloy, Brazing Filler Metal 94Ni – 3.5Si – 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidous
standard by SAE International, 01/03/2017

SAE AMS4452E

Magnesium Alloy, Investment Castings 8.7Al – 0.70Zn – 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated
standard by SAE International, 06/27/2012

SAE AMS4676F

Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni – 3.0Al – 0.62Ti – 28Cu Hot-Finished, Precipitation Hardenable
standard by SAE International, 01/04/2017

SAE AMS4941G

Titanium Tubing, Welded 40 ksi (276 MPa) Yield Strength
standard by SAE International, 08/29/2017

SAE AMS4463A

Aluminum Alloy, Plate (7255-T7751) 8.0Zn – 2.3Cu – 2.0Mg – 0.12Zr Solution Heat Treated, Stress Relieved, and Overaged
standard by SAE International, 10/13/2017

SAE AMS4424L

Magnesium Alloy Castings, Sand 6.0Al – 3.0Zn (AZ63-T6) Solution and Precipitation Heat Treated
standard by SAE International, 02/26/2014

SAE AMS4913B

Titanium Alloy, Sheet and Strip 4al 3mo 1v Solution and Precipitation Treated
standard by SAE International, 01/01/1981