SAE AMS5546D

Steel Sheet and Strip, Corrosion and Moderate Heat Resistant 16.5Cr – 4.5Ni – 2.9Mo – 0.10N Cold Rolled, Tempered
standard by SAE International, 10/12/2012

SAE AMS5363F

Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr – 10.5Ni – 0.90 (Cb+Ta) Solution Heat Treated (Stabilized: Apr 2017)
standard by SAE International, 04/04/2017

SAE AMS4902J

Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength
standard by SAE International, 04/14/2009

SAE AMS4816D

Bearings, Silver-Clad Steel Strip
standard by SAE International, 10/30/2006

SAE AMS5582F

Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni – 15.5Cr – 0.95Cb (Nb) – 2.5Ti – 0.70Al – 7.0Fe Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength
standard by SAE International, 01/03/2013

SAE AMS4416

Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu 1.7Li 0.4Ag 0.10Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially Aged
standard by SAE International, 07/31/2008

SAE AMS4602D

Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4)
standard by SAE International, 09/21/2017

SAE AMS5371E

Steel Castings, Sand, Corrosion and Heat Resistant, 19.5Cr – 9.5Ni (Low Carbon) (304L) Solution Heat Treated
standard by SAE International, 03/07/2007

SAE AMS4434N

Magnesium Alloy Castings, Sand 9.0Al – 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
standard by SAE International, 12/07/2017

SAE AMS5341C

Steel Castings, Investment, Corrosion Resistant 19.5Cr – 10.5Ni – 0.25S (Type 303) Solution Heat Treated
standard by SAE International, 04/10/2012