SAE AMS4470

Aluminum Alloy, Plate (7085-T7451) 7.5Zn 1.6Cu 1.5Mg 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
standard by SAE International, 10/23/2009

SAE AMS4444D

Magnesium Alloy Castings, Sand 6.0Zn – 0.80Zr (ZK61A-T5) Precipitation Heat Treated
standard by SAE International, 04/03/2012

SAE AMS5558G

Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr – 10.5Ni – 0.70Cb (SAE 30347) Thin Wall, Solution Heat Treated
standard by SAE International, 07/14/2003

SAE AMS5636F

Steel, Corrosion-Resistant, Bars and Wire 18Cr – 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength
standard by SAE International, 04/11/2012

SAE AMS5339G

Steel, Maraging, Investment Castings 17Ni – 10Co – 4.6Mo – 0.30Ti – 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
standard by SAE International, 03/24/2017

SAE AMS4917H

Titanium Alloy Sheet, Strip, and Plate 13.5V – 11Cr – 3.0Al Solution Heat Treated
standard by SAE International, 10/19/2012

SAE AMS5567E

Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr – 10Ni (SAE 30304), Solution Heat Treated
standard by SAE International, 08/21/2002

SAE AMS5357D

Steel, Corrosion-Resistant, Investment Castings 15Cr – 4.6Ni – 0.22Cb – 2.8Cu Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 06/01/2017

SAE AMS4410A

Aluminum Alloy Plate (7081-T7451) 7.2Zn – 1.5Cu – 2.0Mg – 0.10Zr Solution Heat Treated, Stress Relieved and Overaged (Stabilized: May 2019)
standard by SAE International, 05/07/2019

SAE AMS4474

Aluminum Alloy, Sheet and Plate, 4.0Cu – 1.0Li – 0.40Mg – 0.35Ag – 0.13Zr (2195-T8), Solution Heat Treated, Cold Worked, and Artificially Aged
standard by SAE International, 10/19/2012