SAE AMS5027E

Steel, Welding Wire 1.05Cr 0.55Ni 1.0Mo 0.08V (0.26 0.32C), Vacuum Melted, Environment-Controlled Packaging ( Reaffirmed: Sep 2007 )
standard by SAE International, 08/01/2002

SAE AMS5396D

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 65ni 28mo 5.5fe 0.4v (N-12mv) As-Cast
standard by SAE International, 01/24/2005

SAE AMS5316D

Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast
standard by SAE International, 04/03/2013

SAE AMS5624E

Steel Bars, High Expansion 4.5Mn – 4.0Cr – 12.5Ni (0.50 – 0.60C) Cold Finished
standard by SAE International, 04/11/2012

SAE AMS5507H

Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr – 13Ni – 2.5Mo (316L) Solution Heat Treated
standard by SAE International, 03/01/2019

SAE AMS5712J

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.6Al – 0.006B Vacuum Melted, Solution Heat Treated Precipitation Hardenable
standard by SAE International, 01/26/2012

SAE AMS4406A

Aluminum Alloy, Centrifugal Castings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated
standard by SAE International, 02/15/2018

SAE AMS4382D

Magnesium Alloy, Plate, Extra Flat 3.0Al ¿¿¿ 1.0Zn ¿¿¿ 0.20Mn (AZ31B-0) Annealed
standard by SAE International, 11/08/2018

SAE AMS5400C

Steel, Corrosion-Resistant, Investment Castings 15Cr – 4.6Ni – 0.22Cb – 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength
standard by SAE International, 07/28/2014

SAE AMS5514G

Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr – 11.5Ni (SAE 30305) Solution Heat Treated
standard by SAE International, 04/10/2012